What's new in the Android app

• With miles in your profile, the ride screen says "after 1.2 mi" instead of "after 2 km", and its help texts use your units too.
• A motorcycle figure that stops updating, such as the cell voltages, is greyed with its age even while the other figures keep coming.
• If the server refuses part of a ride, the rides after it are still sent. The refused part stays on the phone and is tried again later.
• When you are signed out, the "ride kept on the phone" notification asks you to sign in.

• If the app cannot connect to your motorcycle, you can still ride with the phone only: it records the route and its motion, and the ride joins the motorcycle's log once you upload it.

• If Android closes ZeroLogs during a ride, the same ride continues when the app comes back within 10 minutes, and the app reconnects to the motorcycle.
• When the motorcycle's Bluetooth link drops during a ride, the app tries again by itself.

• Plainer wording across the app: messages, the Bike tab and the ride screen say things more simply, with the same meaning.
• Clearer messages when the phone is offline, when a log download stops early and when Bluetooth is off for the tyre sensors.

• Signed out by the server (another device, a new password, or expired): the Bike tab says so, and logs and rides wait on the phone until you sign in again. Before, they could be dropped.
• Phone storage full during a ride: the app no longer closes. The ride goes on in memory and is saved as soon as there is space.
• A log downloaded when the phone has no space left now says so, instead of "the connection dropped".

• When a ride ends with a live link still open, the app asks: stop sharing, or keep it. The question is on the Bike tab and in a notification, for a ride that ended with the phone in your pocket.
• "Keep sharing" holds for that link: the next ride of the same trip does not ask again.
• Stopping without signal (a garage) is no longer lost: the link closes as soon as the phone is back online.

• Share live now works on every ride, including rides with the phone alone: the link shows where you are from the start.
• On the live page your position is marked "Now", not "End".
• SR/F, SR/S, DSR/X, S/F and 2024+ (Bluetooth LE): the pairing finds the bike by name too, and the connection retries when Android's Bluetooth fails, re-reads the bike's services, and asks for a faster link while downloading logs.

• Tyre sensors follow your account: which sensor is on which wheel comes back on a second phone or after a reinstall, and the bike page on zerologs shows each sensor's battery.
• A change you make on the phone is never undone by an older one from another phone, whatever its clock says (tyre sensors and the ride dashboard).

• Your ride dashboard follows your account: the preset it opens on and the tiles you arranged come back on a second phone or after a reinstall.
• "Ride sent" now opens the ride itself, not the list of recordings.
• Tyre sensors: a low sensor battery is notified once, and a sensor silent for two weeks while you ride is flagged.

• Report a problem from the app (bottom of the Bike tab, and in Log): your words reach us as a ticket, with the technical log and phone details if you leave the box ticked. Answers come by email and on Feedback.
• If ZeroLogs closes unexpectedly, the error stays on the phone and the next launch offers to send it.
• Tyre sensors: more kinds are read (SYTPMS, iTPMS, FOBO, HRTPMS, TC.TPMS). Yours is missing? Record 30 s from the tyre screen and send it.

• New, being tested: Bluetooth LE motorcycles (SR/F, SR/S, DSR/X, S/F, and the S, SR, DS and DSR from 2024). Pair with the PIN the dash shows; battery, charge, odometer, speed, ride mode and the log download. Read-only, as on the other Zeros: it never sets the clock or any setting.
• A second motorcycle is easier to add: "Use another motorcycle" is now a full button.
• If something looks wrong, share the technical log (Log, top right).

• Fix: stopping a ride could close the app (the Bike tab read the ride database while the ride was being saved).
• Tyre sensors, as in 0.18.0: pair them in the Bike tab; both pressures on the dash; every reading kept with the ride.

• Tyre pressure sensors (BLE TPMS, "TPMSII" kits): pair them in the Bike tab; front and rear are proposed from the sensors themselves.
• Ride dashboard: both pressures in one line. Stopped, a tap shows each tyre in detail; a leak or a very low tyre goes to the banner.
• Every new reading is kept with the ride: on zerologs.bike, each ride's tyres and their trend over months.

• Rides recorded with the phone alone now upload: after the ride, say which of your motorcycles it was.
• Ride dashboard: tiles, the way home and a tile's explanation only when unlocked and stopped.
• If the motorcycle goes quiet, its figures turn grey with their age.
• The Range tile and the way-home card agree.
• Miles, mph, feet and °F if your profile uses them.
• No signal: the Bike tab still connects and records.
• Rides upload more reliably, with less data.

• The battery log (BMS) download now ends at the right size instead of running on.
• A two-part download shows both steps: 1/2 motorcycle log, 2/2 battery log.
• The app is in English, like the website.
• Dashboard: tiles of equal size, captions on one line, tap a tile (unlocked) to see what it shows.
• Altitude shows how much you went up and down.
• At night the weather shows the moon in tonight's phase.

• If a ride stops because Android closed the app, the app now says so when you open it, and how to prevent it (on Samsung: Never sleeping apps). If you closed it yourself, it reminds you to hold Stop.

• Ride dashboard with a large font size: the buttons' labels fit on one line ("Share live", the preset), the way-home hint is no longer cut.

• Sunlight: a "Sun" button on the ride dashboard makes every screen high-contrast — pure black, brighter text — for riding in direct sun. It stays on for the next ride.
• TalkBack: the dashboard's buttons work with a double-tap (and double-tap and hold for the ones that must be held), and each tile is read as one.

• The app speaks Italian: on a phone set to Italian, the ride dashboard, the notifications and the Bike tab are in Italian. The zerologs site stays in English for now.
• Android 13 and later: choose the app's language in Settings → Apps → ZeroLogs → Language.

• Speed: the dashboard measures how far your speedometer reads from GPS, and the speed colours follow the preset (City, Trip, Sport).
• Landscape: two columns, the buttons stay on screen.
• Getting started: a short checklist you can skip or resume.
• When something blocks the app (location off, notifications, an old version, low storage) it says so, with one button to fix it.
• The phone tidies up what is already on zerologs.
• Which Zero gets what, said plainly.

• Ride dashboard: hold a tile to choose what it shows; each value has its ride-so-far curve with the peak; bigger numbers; Range and Trip tiles.
• "Way home" is off until you choose: a saved place (Home, Work), today's first position, or where the trip started.
• A cleaner Bike tab.
• "On this phone": what is waiting to upload, readable offline; no network shows it instead of an error.

• The battery's log too: "MBB + BMS — full" downloads the motorcycle's log and then the battery's (charges, cells, the pack's history), as the official app does.
• The firmware of every board and the motorcycle's active faults, on the Bike tab.
• Fix: logs with blank flash pages now come out whole.

• The motorcycle's own readings, named: odometer, trip A/B, the dash's range, speedometer, motor and controller temperatures, armed and kickstand.
• Ride dashboard: the speedometer beside GPS speed, the dash's range in "Way home", a Motor tile (Sport).
• Warnings from the battery's own management: pack hot or cold, cells out of balance.

• Stopped with the motorcycle connected? The dashboard offers to take the day's log before you switch off, with the download's progress in place.
• The time quoted for a log download is your own last one.
• The ride summary says what only the motorcycle's log adds.

• Cell balance is judged at rest: the spread that grows when you accelerate hard is the cells' resistance, normal, and no longer raises a warning. A weak cell is judged for the load it is under.
• One log download at a time: repeated taps no longer start the download again and again.
• A tap on a button that must be held now says so.

• Dashboard presets: Trip (every Wh counts), Sport, City — change them from the chip at the top.
• The weather where you are, every 10 minutes: temperature, rain, and the wind as you meet it (head or tail).
• Your units from your zerologs profile: km or miles, °C or °F, m or ft.
• The ride summary shows the photos you took.

• Cell balance on the dashboard: the spread between the strongest and weakest cell in mV, coloured past 50 and 100 mV.
• A clearer ride dashboard: big numbers with icons, a speed gauge, the battery bar marked where the trip started, and "Can I get home?" in green, amber or red.
• Colours only when they mean it: low battery, a weak cell, a hot pack. The pack's temperature is now told apart from the electronics'.
• Rides start by themselves once you ride off with the bike connected.

• A clearer ride dashboard: big numbers with icons, a speed gauge, the battery bar marked where the trip started, and "Can I get home?" in green, amber or red.
• Colours only when they mean it: low battery, a weak cell, a hot pack. The pack's temperature is now told apart from the electronics'.
• Rides start by themselves once you ride off with the bike connected.
• The "log ready" notice opens what the new file added.

• A ride dashboard of its own, locked while you ride: energy left and the range at your pace, consumption, the grade, climb, the weakest cell. Hold a button to use it; it shows over the lock screen.
• Quick buttons: a photo goes into the ride and onto its trip on the site; share the ride live in one press.
• The phone stays awake for the whole ride, and any GPS gap is counted and shown.

• Rides start and stop by themselves: turn it on in the Bike tab, ride off with the motorcycle connected, and the ride records; stop for a few minutes or switch the bike off and it ends.
• Share a ride live: a link that shows where you are and the road so far, for as long as you choose. Nothing near where you start is shown, the battery only if you want.
• On the website, a ride recorded by the app appears in Trips straight away, before its log is downloaded.

• Help decode Zero motorcycles: an optional switch to share the motorcycle's raw readings (never your position), so the values nobody has named yet can be decoded across many bikes.
• Your marks in a decoding session are sent too, when sharing is on.
• My Bikes and the Dashboard show the motorcycle paired with this phone, one tap from the Bike tab.

• Guided pairing in three steps, with Zero's own instructions; the list shows only Zero motorcycles.
• The Bike tab says which bike of your account it is, with a link to My Bikes, or adds it.
• Two clear choices: Ride, or Download logs — with what MBB and BMS contain.
• Rides: a check before starting, a big live screen (speed, km, battery, energy, altitude), screen kept on, and a summary at the end.

• Bike tab: "Everything the motorcycle reports" — model and part number, the battery's own capacity and remaining Ah, every cell as a bar, all temperature probes, the controller's status bits.
• "Help decode the motorcycle": record what the bike sends while you mark key on, kickstand, ride mode or charger, and share the file. Works offline.

• A recorded ride joins its ride on the site: the route is added to it, now or as soon as that day's motorcycle log is uploaded. One ride, never two.
• The Bike screen follows a downloaded log live: waiting for a network, sending, ready with what it contains.
• A notification tells you when a ride is kept on the phone and when it has been sent.
• Fixed: one unreadable sample could close the app during a recording.

• One app: the Bike screen and your account now share one bottom bar, with the same icons as the site. No more screens opening on top of each other.
• Record a ride: GPS, the phone's motion sensors and, when connected, the motorcycle's battery readings.
• Without internet the ride is kept on the phone and sent when you are back online; with internet it is sent as you ride.

• The app now opens on your motorcycle: turn on Bluetooth, pair the bike and connect from the app.
• Live readings: battery %, pack voltage, Ah, the 28 cells and their balance, temperatures.
• Download the MBB log with every step shown — speed, pauses, each frame — even with no internet: it uploads later.
• A technical log you can share if the connection fails.

• New: download the log straight from your Gen2 Zero over Bluetooth. Pair the bike in Android's Bluetooth settings, then open This phone → Download the log from your motorcycle. Read-only: the app only asks the bike for its log, never changes a setting. About 6 minutes; the file then uploads like any other.

• Links from zerologs emails (sign-in, email verification, password reset) and links to your reports and dashboard now open in the app.
• Easier to read: no text smaller than 11 px on the phone, and the batteries page no longer scrolls sideways.

First test release of ZeroLogs for Android.

• Sign in and this phone is linked to your zerologs account.
• Upload .bin logs and console captures from the app, or share them from the Zero app or Files (Share → ZeroLogs).
• Uploads wait on the phone and go out by themselves when there is a connection, even with the app closed.
• A notification tells you when a log has been read, and opens the report.