Zero error code 24
Startup Error
What it means
Startup Error
System startup sequence failed
Error — Issue detected, may affect performance.
What to do
- 1Power cycle. Check 12V battery voltage.
Code 24 on the other dash
The number alone is not enough. A Gen2 dash reads code 24 as Startup Error; a Gen3 dash reads the same number as 12V Battery Reversed. And the model name does not settle it: the S, SR, DS and DSR kept their names when they moved from the Sevcon dash to Cypher III in 2024, so it is the year that tells you which table applies.
Which bikes use this table
Sevcon-era dash: S, SR, DS (2014-2023), DSR (2016-2023), FX (2014-2025), FXS (2016-2021), FXE (2022-2025). The SDS and XMX owner manuals print the same 0-63 table.
Related codes
Other Gen2 System codes:
What the log file records for the same subsystem:
Questions
What does error code 24 mean on a Zero Gen2 dash?
Startup Error. System startup sequence failed. It is classed as error: issue detected, may affect performance.
What should I do about it?
Power cycle. Check 12V battery voltage.
Does code 24 mean the same thing on a Gen3 Zero?
No. On a Gen3 dash, code 24 is "12V Battery Reversed" — a different fault entirely. The two tables share numbers but not meanings, so read the one that matches your dash, not your model name: the S, SR, DS and DSR kept their names when they moved to Cypher III in 2024.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.