Common problems, and what to do
These are the problems riders report to us most often, each in the words riders use for it. Every answer says why it happens and what to do about it. If yours is not here, send a report from the app or from this site so we can look into it.
1The app can’t connect to my motorcycle ("not found").
Only one app at a time can hold the motorcycle’s Bluetooth link. If another app that connects to your motorcycle is open, even in the background, ZeroLogs cannot connect. Close that app (swipe it away), turn the key on, keep the phone near the bike and connect again.
2The battery (BMS) log download stopped early.
The motorcycle sometimes marks a block of its log as failed. Before app 0.36.4, ZeroLogs took that mark for the end of the log and kept only what it had read so far. From 0.36.4 it asks for the block again and reads the log to the end. If the motorcycle really does end the log early, the app keeps what it read and tells you how much. Update the app and download again. If it still stops early, send a report from the app: it attaches the technical log we need.
3The download takes several minutes on my 2015 or 2016 Zero.
These motorcycles send their logs in 1 KiB blocks, and the battery answers about one block per second: 256 blocks take about four minutes. The main controller’s (MBB) log is faster, about a minute. Keep the key on and the phone near the bike until the app says it is done.
4On my 2016 model the app shows no charge level ("Not reported by this motorcycle").
The 2016 boards do not send the charge level over Bluetooth: those fields arrive empty. Until app 0.36.4 the app showed that as 0 %, which was wrong. The voltage and the other readings are real, and the charge history on your pages still comes from the logs you upload, which do record it.
5My dash showed 110 % but ZeroLogs said 100 %. Should I change my battery to a bigger one?
No. Extended Range Charging, a paid Cypher upgrade, charges the same pack to a displayed 110 %: it is a charge level, not a bigger battery. Keep the battery you have (for example ZF15.6); setting a larger one would make your pack’s health look worse than it is. Since 2026-11-13 ZeroLogs reads up to 110 % from the motorcycle’s (MBB) log. The battery’s own (BMS) log counts only to 100 %, so its figures stop there while the dash still climbs.
6A ride or a charge appears twice, about an hour apart (SR/F, SR/S, DSR/X, 2024+ models).
On these motorcycles the battery (BMS) keeps its own clock, and it drifts behind the motorcycle’s: we measured up to about 90 minutes. Its copy of a ride then looks like a second ride. Since 2026-11-13 ZeroLogs measures that drift from the pack voltage both logs record and puts the battery log on the motorcycle’s clock, and logs uploaded before were read again. If you still see a ride twice, send a report from that ride’s page.
7My log shows almost nothing, or dates like 1970 or 2028.
A board’s clock that lost power starts again from 1970, and one that was set wrong can run years ahead. The records are real but their dates are impossible, so ZeroLogs cannot place them on your timeline yet: we are working on placing such logs by the time they were downloaded. Send a report from the app or from the log’s page so we can look at your file.
8Rides from a few days ago are missing from my log.
The motorcycle keeps its log in a fixed space and writes over the oldest records. A parked SR/F, SR/S or DSR/X fills it in about three days; older models keep more. Download both logs (MBB and BMS) soon after the rides you care about. What was overwritten is gone from the bike.
9Do I need to upload both the MBB and the BMS log?
Yes. They record different things: the MBB the motorcycle’s state, rides, motor and odometer; the BMS the battery’s cells, current and charges. ZeroLogs joins the two, so each fills what the other lacks.
10My Zero has two battery modules, but only one battery log arrives.
Each battery module keeps its own log, and the motorcycle sends the first one unless it is asked to switch. In the app, choose "MBB + BMS + second battery (BMS1)" (app 0.36.7 or later): it reads the second module and switches the motorcycle back to the first. It also works with the motorcycle on its onboard charger and the key off.
11Can I install the app without Google Play?
Yes. zerologs.bike/app offers the same Android app as a file you install yourself, and downloading it needs no account. Updates then do not arrive by themselves: the app tells you when a new version is out, and you download it from the same page.
Not on this list?
In the app: Report a problem on the Bike tab sends us what happened together with the app’s technical log.
On this site: Report a problem, in the footer, sends us a message with the page you were on.