Zero error code 43
Low Battery Temperature Status Disable
What it means
Low Battery Temperature Status Disable
Battery too cold - motor disabled for protection
Warning — Monitor the situation, may self-resolve.
What to do
- 1Warm the battery. Move to warmer location.
Code 43 on the other dash
The number alone is not enough. A Gen2 dash reads code 43 as Low Battery Temperature Status Disable; a Gen3 dash reads the same number as Isolation Fault. And the model name does not settle it: the S, SR, DS and DSR kept their names when they moved from the Sevcon dash to Cypher III in 2024, so it is the year that tells you which table applies.
Which bikes use this table
Sevcon-era dash: S, SR, DS (2014-2023), DSR (2016-2023), FX (2014-2025), FXS (2016-2021), FXE (2022-2025). The SDS and XMX owner manuals print the same 0-63 table.
Related codes
Other Gen2 Safety Interlock codes:
Questions
What does error code 43 mean on a Zero Gen2 dash?
Low Battery Temperature Status Disable. Battery too cold - motor disabled for protection. It is classed as warning: monitor the situation, may self-resolve.
What should I do about it?
Warm the battery. Move to warmer location.
Does code 43 mean the same thing on a Gen3 Zero?
No. On a Gen3 dash, code 43 is "Isolation Fault" — a different fault entirely. The two tables share numbers but not meanings, so read the one that matches your dash, not your model name: the S, SR, DS and DSR kept their names when they moved to Cypher III in 2024.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.