Zero error code 14
Right Turn Signal Bulb Out Fault
What it means
Right Turn Signal Bulb Out Fault
Right turn signal connection open - the bulb or its connector is out.
Warning — Monitor the situation, may self-resolve.
What to do
- 1Check/replace the right turn signal bulb or connection.
Code 14 on the other dash
The number alone is not enough. A Gen3 dash reads code 14 as Right Turn Signal Bulb Out Fault; a Gen2 dash reads the same number as Safety Override Active. And the model name does not settle it: the S, SR, DS and DSR kept their names when they moved from the Sevcon dash to Cypher III in 2024, so it is the year that tells you which table applies.
Which bikes use this table
Cypher III dash: SR/F and SR/S (2020+), DSR/X (2023+), S/F, and the S, SR, DS and DSR from 2024, when those four moved to the FST platform.
Related codes
Other Gen3 Lighting codes:
Questions
What does error code 14 mean on a Zero Gen3 dash?
Right Turn Signal Bulb Out Fault. Right turn signal connection open - the bulb or its connector is out. It is classed as warning: monitor the situation, may self-resolve.
What should I do about it?
Check/replace the right turn signal bulb or connection.
Does code 14 mean the same thing on a Gen2 Zero?
No. On a Gen2 dash, code 14 is "Safety Override Active" — a different fault entirely. The two tables share numbers but not meanings, so read the one that matches your dash, not your model name: the S, SR, DS and DSR kept their names when they moved to Cypher III in 2024.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.