Kill Switch Active
Motor kill switch is in OFF position
What it means
Motor kill switch is in OFF position
Informational — Normal operation events, no action required.
Likely causes
- Kill switch toggled off
What to do
- 1Toggle kill switch to RUN position
- 2Normal safety feature
Which bikes use this table
Recorded in the binary log rather than shown on the dash — every generation writes them.
Related codes
Other log file System codes:
Dashboard codes for the same subsystem:
Questions
What does "Kill Switch Active" mean in a Zero log?
Motor kill switch is in OFF position. It is written by the MBB. It is classed as informational: normal operation events, no action required.
What should I do about it?
Toggle kill switch to RUN position. Normal safety feature.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.