Zero error code 46
BMS Charger Connected Disable
What it means
BMS Charger Connected Disable
BMS detected charger connected - motor disabled (normal)
Informational — Normal operation events, no action required.
What to do
- 1Disconnect charger to ride.
Code 46 on the other dash
The number alone is not enough. A Gen2 dash reads code 46 as BMS Charger Connected Disable; a Gen3 dash reads the same number as Memory Fault. And the model name does not settle it: the S, SR, DS and DSR kept their names when they moved from the Sevcon dash to Cypher III in 2024, so it is the year that tells you which table applies.
Which bikes use this table
Sevcon-era dash: S, SR, DS (2014-2023), DSR (2016-2023), FX (2014-2025), FXS (2016-2021), FXE (2022-2025). The SDS and XMX owner manuals print the same 0-63 table.
Related codes
Other Gen2 Safety Interlock codes:
Questions
What does error code 46 mean on a Zero Gen2 dash?
BMS Charger Connected Disable. BMS detected charger connected - motor disabled (normal). It is classed as informational: normal operation events, no action required.
What should I do about it?
Disconnect charger to ride.
Does code 46 mean the same thing on a Gen3 Zero?
No. On a Gen3 dash, code 46 is "Memory Fault" — a different fault entirely. The two tables share numbers but not meanings, so read the one that matches your dash, not your model name: the S, SR, DS and DSR kept their names when they moved to Cypher III in 2024.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.