Zero error code 50
Battery Module Features Not Supported
What it means
Battery Module Features Not Supported
Battery module is newer or older than motorcycle firmware. Some features may not be available.
Warning — Monitor the situation, may self-resolve.
What to do
- 1Update firmware or accept limited features.
Code 50 on the other dash
The number alone is not enough. A Gen3 dash reads code 50 as Battery Module Features Not Supported; a Gen2 dash reads the same number as BMS Self-Test Error. And the model name does not settle it: the S, SR, DS and DSR kept their names when they moved from the Sevcon dash to Cypher III in 2024, so it is the year that tells you which table applies.
Which bikes use this table
Cypher III dash: SR/F and SR/S (2020+), DSR/X (2023+), S/F, and the S, SR, DS and DSR from 2024, when those four moved to the FST platform.
Related codes
Other Gen3 Battery/BMS codes:
What the log file records for the same subsystem:
Questions
What does error code 50 mean on a Zero Gen3 dash?
Battery Module Features Not Supported. Battery module is newer or older than motorcycle firmware. Some features may not be available. It is classed as warning: monitor the situation, may self-resolve.
What should I do about it?
Update firmware or accept limited features.
Does code 50 mean the same thing on a Gen2 Zero?
No. On a Gen2 dash, code 50 is "BMS Self-Test Error" — a different fault entirely. The two tables share numbers but not meanings, so read the one that matches your dash, not your model name: the S, SR, DS and DSR kept their names when they moved to Cypher III in 2024.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.