Charge Current Limited
BMS has reduced charging current
What it means
BMS has reduced charging current
Warning — Monitor the situation, may self-resolve.
Likely causes
- Pack temperature high or low
- One or more cells approaching voltage limit
- Normal CV phase behavior
What to do
- 1Allow pack to adjust temperature
- 2Normal behavior near 100% SOC
- 3If unexpected, monitor temperatures
Which bikes use this table
Recorded in the binary log rather than shown on the dash — every generation writes them.
Related codes
Other log file Charging codes:
Dashboard codes for the same subsystem:
Questions
What does "Charge Current Limited" mean in a Zero log?
BMS has reduced charging current. It is written by the BMS. It is classed as warning: monitor the situation, may self-resolve.
What should I do about it?
Allow pack to adjust temperature. Normal behavior near 100% SOC. If unexpected, monitor temperatures.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
Community reference: ZeroManual wiki entry
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.