Zero error code 35
Pilot Signal Invalid Fault
What it means
Pilot Signal Invalid Fault
Charging station pilot signal error.
Error — Issue detected, may affect performance.
What to do
- 1Disconnect charging pistol, wait 2 minutes, retry. Try different charger.
Code 35 on the other dash
The number alone is not enough. A Gen3 dash reads code 35 as Pilot Signal Invalid Fault; a Gen2 dash reads the same number as Loopback Error. And the model name does not settle it: the S, SR, DS and DSR kept their names when they moved from the Sevcon dash to Cypher III in 2024, so it is the year that tells you which table applies.
Which bikes use this table
Cypher III dash: SR/F and SR/S (2020+), DSR/X (2023+), S/F, and the S, SR, DS and DSR from 2024, when those four moved to the FST platform.
Related codes
Other Gen3 Charging codes:
What the log file records for the same subsystem:
Questions
What does error code 35 mean on a Zero Gen3 dash?
Pilot Signal Invalid Fault. Charging station pilot signal error. It is classed as error: issue detected, may affect performance.
What should I do about it?
Disconnect charging pistol, wait 2 minutes, retry. Try different charger.
Does code 35 mean the same thing on a Gen2 Zero?
No. On a Gen2 dash, code 35 is "Loopback Error" — a different fault entirely. The two tables share numbers but not meanings, so read the one that matches your dash, not your model name: the S, SR, DS and DSR kept their names when they moved to Cypher III in 2024.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.