Charged To Full
Battery has reached 100% state of charge
What it means
Battery has reached 100% state of charge
Informational — Normal operation events, no action required.
Likely causes
- Charge cycle completed successfully
What to do
- 1Disconnect charger when convenient
- 2For long-term storage, discharge to 50-70%
Which bikes use this table
Recorded in the binary log rather than shown on the dash — every generation writes them.
Related codes
Other log file Charging codes:
Dashboard codes for the same subsystem:
Questions
What does "Charged To Full" mean in a Zero log?
Battery has reached 100% state of charge. It is written by the BMS. It is classed as informational: normal operation events, no action required.
What should I do about it?
Disconnect charger when convenient. For long-term storage, discharge to 50-70%.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.