Charge Tank Communication Lost
Communication lost with optional Charge Tank module
What it means
Communication lost with optional Charge Tank module
Warning — Monitor the situation, may self-resolve.
Likely causes
- Charge Tank not installed
- Charge Tank connector loose
- Charge Tank fault
What to do
- 1Normal if Charge Tank not installed
- 2Check Charge Tank connections if installed
- 3Charging will proceed with onboard charger only
Which bikes use this table
Recorded in the binary log rather than shown on the dash — every generation writes them.
Related codes
Other log file Communication (CAN) codes:
Dashboard codes for the same subsystem:
Questions
What does "Charge Tank Communication Lost" mean in a Zero log?
Communication lost with optional Charge Tank module. It is written by the MBB. It is classed as warning: monitor the situation, may self-resolve.
What should I do about it?
Normal if Charge Tank not installed. Check Charge Tank connections if installed. Charging will proceed with onboard charger only.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
Community reference: ZeroManual wiki entry
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.