Charger Communication Lost
Communication lost with onboard charger module
What it means
Communication lost with onboard charger module
Error — Issue detected, may affect performance.
Likely causes
- Charger fault
- Wiring issue
- Charger module offline
What to do
- 1Disconnect and reconnect power
- 2Try different outlet
- 3Check charger connections
Which bikes use this table
Recorded in the binary log rather than shown on the dash — every generation writes them.
Related codes
Other log file Communication (CAN) codes:
Dashboard codes for the same subsystem:
Questions
What does "Charger Communication Lost" mean in a Zero log?
Communication lost with onboard charger module. It is written by the MBB. It is classed as error: issue detected, may affect performance.
What should I do about it?
Disconnect and reconnect power. Try different outlet. Check charger connections.
See when this actually happened on your bike
A dash code tells you the fault; the log tells you the pack temperature, the state of charge and the ten minutes leading up to it.
Sources:
Community reference: ZeroManual wiki entry
The code and its name are transcribed from Zero's own owner manuals; the severity, category and troubleshooting notes are ours. For official diagnostics, consult an authorized Zero Motorcycles dealer.